Naviate Power and Process 2016 has the following prerequisites:

  • A computer running Windows 7x64, 8x64 or 10x64 (32-bit OS is no longer supported).
  • AutoCAD Plant3D 2016 and/or AutoCAD P&ID 2016

  • If you have bought the Naviate product(s), the license e-mail with your unique license number(s).

  • Administrative user rights to run the installation.

Download and unzip the installation file from your Naviate Community account or from the Naviate Community trial page.

Currently there are three types of licensing for the Naviate products - trial, local and network. If you are using the 30-day trial you can skip this section and go directly to the next.

Local (SLM) or network (NLM) licenses both require license numbers. When ordering any of the licensed Naviate products your will receive an e-mail with your unique license number(s), automatically sent from our license system.

If you have ordered network licenses you will need to set up a license server service on one of the servers in your local network.

NOTE:

Please follow the instructions in the license e-mail and associated video instruction carefully, and set up the license server before you start deploying the Naviate products on the workstation PCs. When the server is set up, make a test installation of the Naviate product and verify that the licensing is working properly before proceeding with the remaining computers.

Double-click on the MSI file to start the installation. Then follow the on-screen instructions, and note the following:

  • When entering customer data, please type in no-nonsense values! The information is used to simplify traceability for efficient support. You will only need to enter the information once since it is shared between all Naviate installations and will be filled in beforehand the next time you run a Naviate product installation.
  • Select the proper type of licensing and enter the license number for the correct Naviate vertical supplied in the e-mail. If you are using network licensing, enter port number@server name as mentioned in the instruction video.

The Naviate Power and Process installation can be run silently from the command line. The command line syntax is as follows:

msiexec /I “<msi>” <params> /qb

 
Parameters:

COMPANY=”company”                    - Company name
NAME=”name”                                 - User/admin name
EMAIL=email                                    - User/admin e-mail
PHONE=”number”                            - User/admin phone number

LICENSETYPE=Disabled|Trial|Local|Network           - Selected license type
LICENSENUMBER=number                                      - Needed if LICENSETYPE=Local|Network

LICENSESERVER=port@server                                - Needed if LICENSETYPE=Network

UPDATEMODE=0|2                          - Disables (0) or enables (2) the UpdateManager. Default is 2.

CQI=0|1                                            - Disables (0) or enables (1) support for shortcuts redirected to the CQi GDIR folder structure.

SHORTCUTS=0|1|2                          - Disables all (0), enables desktop and menu shortcuts (1) or enables menu-only shortcuts (2). Default is 1. 

LOCALPROJECT=0|1                       - Disables (0) or enables (1) local project setup.

MANDATORY PARAMETERS AND DEFAULTS

The COMPANY, NAME, EMAIL, and PHONE parameters are, except when updating, mandatory.

The licensing parameters are optional. If no parameter is specified, Trial will be used.

 

Post-install modification of the installed Naviate product

Beginning with Naviate Power and Process 16.1.1, it is possible to modify the installation after the initial installation. If you for instance need to change the license type, or add support for a second AutoCAD vertical, open up the Windows Control Panel -> Add / Remove Programs -> Modify (Windows 8: Programs and Features -> Change) for the desired Naviate product. Step through the installation dialog sequence and adjust the setup as desired.

NOTE:

Modifying the installation implies changing the machine settings and therfore requires administrative user rights.

NOTE:

If you change the AutoCAD integration setting, for instance by adding support for a second AutoCAD vertical, Windows Installer will ask for the original installation files.

NOTE:

If you change the license type from local to network and have an activated local license on the workstation, don't forget to return it to the Cad-Q Naviate License Server!

The license system prefers local licenses before network licenses, so even if you change the license type in the setup, the local license will be used as long as it is valid.

Local license return is easily accomplished using the Local License Return function in the Cad-Q Naviate Start menu. 

Updates are normally downloaded and installed by the user, through the built-in UpdateManager in Naviate. If central administration of updates are preferred instead, follow these steps:

  • Disable the UpdateManager already at the scripted installation of the Naviate product (se above) using UPDATEMODE=0 on the command line to the installer.
  • Download the update (MSP file) when it is made available on the Naviate Community site. Install it using a script as follows:

    msiexec /P “<msp>” /qb REINSTALLMODE=omus REINSTALL=ALL

In order to enforce proper installation of the Naviate products a number of custom system and configuration tests are run. When running manual installation you will receive a message when any of the tests fails. When running scripted installation, messages are written to the log file if logging is active (see the Microsoft documentation for msiexec.exe) and the installation will generally terminate. The following custom tests are performed:

  • Parameter check: Proper values for the parameters listed above has to be specified either from the registry for an existing installation (when updating), or from the command line, or from the user interface. If the parameter set is found incomplete, the installation will will display an error message and terminate. If this situation occurs during scripted installation, the installation will terminate.
  • Running AutoCAD sessions check: If one or more running AutoCAD sessions are found, a dialog is presented asking the user to shut them down before proceeding. This is because AutoCAD may lock the access to common Naviate Power and Process files that are to be updated. If this situation occurs during scripted installation, the installation will terminate.